MATERIALS:
Seat — One-piece, 1/2" (13mm) thick, solid phenolic with matte-finish, ivory-colored, melamine surfaces and black phenolicresin core — cannot delaminate. Integral slots for water drainage. Secured to frame with stainless steel carriage bolts and acorn 
nuts. Reversible for left- or right-hand installation in the field.
Frame — 18-8 S, type-304, stainless steel with satin finish. 16-gauge (1.6mm), 1-1/4" (30mm) square tubing and 18-gauge 
(1.2mm), 1" (25mm) diameter seamless tubing.
Mounting Flanges (2) — 18-8 S, type-304, 3/16" (5mm) thick stainless steel with satin finish. 3" (75mm) diameter with three 
mounting screw holes.
Baseplate — 18-8 S, type-304, heavy-gauge stainless steel.
Spring — 17-7, type-301, 24-gauge (0.6mm) stainless steel. Spot-welded to baseplate.
Guide Bracket — 18-8 S, type-304, 16-gauge (1.6mm) stainless steel with satin finish.
OpERATIOn:
Shower seat folds up against wall when not in use. The spring at the top of the baseplate holds seat in upright position until 
released by pulling the top of the seat away from the wall. Mounting flanges and guide bracket allow for varying mounting 
heights and leave the floor clear for easy cleaning. Nonporous solid phenolic seat has slots to permit water to drain, does not 
splinter or require oiling, and will not support growth of bacteria. Slotless round-head carriage bolts and acorn nuts provide 
additional safety to user. Bobrick shower seats, when properly installed, have sufficient strength to support 360 lbs., (163 kg) 
complying with barrier-free accessibility guidelines (including ADAAG in the U.S.A.).
InSTALLATIOn:
Installation to Wall. Secure unit to wall at points indicated by an S, with the two mounting flanges located at top and the 
baseplate and guide bracket below. The bottom of the support tube must be positioned within the baseplate and guide bracket 
before they are secured to wall. Mounting height of shower seat must comply with local building codes.
For stud walls, provide concealed backing to comply with local building codes and secure with #14 x 2-1/2" (6.3 x 65mm) 
stainless steel sheet-metal screws furnished by manufacturer.
For prefabricated shower stalls, provided adequate backing by the shower stall manufacturer.  Secure with #14 x 2-1/2" (6.3 x 
65mm) stainless steel mounting screws furnished by manufacturer.
For masonry walls, provide fiber plugs or expansion shields for use with furnished screws, or provide 1/4" (6mm) toggle bolts 
or expansion bolts.